Aquaponics CHOP Mark 2 Operating System.

CHOP or Constant Height One Pump has been adapted by Aquaponics enthusiasts around the world now for the last few years since we coined the term.  The other variant Chift Pist runs in a similar way.  I noticed a problem with water levels whilst working on a small commercial CHOP system we were commissioning just over a year ago.  We needed to refine the process for our client,  so we came up with a solution that we’ve been trialling now for over a year.

It runs so beautifully. I’m very excited by it.

I am so certain this is a better way to run your aquaponics system that we have adopted CHOP2 into all our new larger Aquaponics kits that we design and build.

So what is CHOP Mark2 and why should you consider using it?

Operating the old CHOP method water is pumped up from the sump to the fish tank and from the fish tank runs back to the grow bed and sump by gravity. This system works very well but it requires that the grow beds be perfectly level to function properly. With CHOP Mark2 there are a number of advantages you can study if you watch and play the accompanying animation.

See Animation HERE

With CHOP2 you will notice that the pump sends the water to the grow bed as well as the main fish tank simultaneously. The water from the fish tank and grow beds runs back to the central sump.

It’s kind of like a double loop water flow with the sump as the central mixing point. It works extremely well.

So what are the advantages of modifying your system to CHOP Mark2?

The main point is that grow beds do not need to be perfectly level to function properly.  A crucial point if you are running a number of them on uneven ground and have encountered problems with your auto siphons. Because each grow bed has an independent ball valve, the water flow can be regulated with greater control than gravity fed flow under the old CHOP system.
Recently we commissioned an 18 bed system utilising two of our large commercial fish tanks.  To facilitate good water flow we used CHOP Mark2 together with sequencing valves.

Because each Fish Tank also now has its own ball valve it means water flow to the fish tank/s can now also be regulated as well.

If you need to harvest your fish and control the water depth or do any maintenance at all, you now have complete control to stop water flowing to your main fish tank or even drain it,  but not stop the flow to your other grow beds.

More control for the aquaponics enthusiast also means more control over winter temperatures as the mercury plummets.

In colder climes operators can turn off their grow beds at night but still have their main fish tank running as normal.  This is a great boost for owners who complained that their grow beds were acting as a heat sink at night, plunging their water temperature down a number of degrees.

A side benefit for users who will modify their system to CHOP Mark2 is that should they decide to change their system from a gravel based media to floating raft, CHOP Mark2 will accommodate their design shift.

If a combination media and raft system were to be built,  Swirl filters or regular filters can be fitted easily into the fish tank to raft section, then we can allow the rafts to drain back to the sump.

An elegant solution.

But what are the disadvantages of running this system?

The critics will say that the sump pumps half the water back to the fish tank. Surely this can’t be good for the fish, as solids are returned back to the main tank?

Logically this may seem to be the case, but over a year of trialling this system with hundreds of fish we have discovered that the sump itself acts as a settling tank for solids, something that we didn’t expect to see and something that has never happened under the old CHOP system.

You will need to clean your sump occasionally as the solids will be noticeable around the sides of the sump.  This is a good thing and it is not hard to do.

What about fish nutrients?  Aren’t you halving the number of fish nutrients by returning the flow back to the main fish tank?

Some may think that the nutrients from the fish tank will be diluted as the sump water is pumped partly back to the fish tank and partly to the grow beds.  In just over 12 months of running we see no reduction in nutrient to the grow beds.
Conversely,  some may think that the nutrient level may be too high and perhaps there will not be enough filtration or bacterial action because some of the water that has just arrived in the sump from the fish tank will be returned directly back to the fish tank.

We initially felt some of these fears ourselves, but with 12 solid months of field trials behind we see the systems running exceptionally well.

We see CHOP2 as a definite improvement for the Aquaponics community around the world.  Come back in 12 months time as see how many users have modified their system to CHOP Mark2.
People always vote with their feet. They know when they’re onto a good thing.

The next generation of CHOP.   CHOP Mark2

1  Grow beds do not have to be exactly level with each other as they do for CHOP mark 1
2  Flow to the grow beds can more easily be regulated than with a gravity flow.
3  Fish tank can easily be isolated if required for whatever reason.  We regularly switch off the fish tank to pump it down to do a fish count or capture and the grow beds are still left running.
4  Grow beds can easily be isolated if winter night time shut down of the flow to the grow beds is required while fish tank still enjoys excellent water exchange.
5  If a combination media and raft system were to be built, swirl filters or regular filters can be fitted easily into the fish tank to raft section then rafts drain back to the sump.

Happy Aquaponics
First Posted on October 27, 2010

16 Responses to Aquaponics CHOP Mark 2 Operating System.

  1. Adam says:

    Hi Murray. My system is one of your chop2 successes.
    Interested people northside of brisbane are welcome to organise an inspection- through you- if you like.

  2. Murray says:

    Thanks Adam. I must drop over one day soon and get some photos.

  3. Colin Roberts says:

    Hi Murray,
    I have a CHOP system, with the beds at different levels, but I approached the issue of equal flow separation from a different perspective as I work for Hydraulic and Civil Engineers. In their field the “relative level” of outlets is significant. I applied this principle to my system where the flow is gravity fed from the fish tank to the swirl filter, and then to the beds. These return pipes to the beds are on the ground. The return elbows are at the same “relative level” (using a dumpy level) above the beds, ensuring fairly equal flows to each bed.
    I do like the idea of winter circulation and aeration, so I might try to incorporate it somehow. I’ll make an appointment and call in some time.

  4. Murray says:

    Good work Colin. Having the outlets level relative to each other is very important….unless you use a valve on each one to regulate the flow, but the use of valves costs more and needs a lot of fine tuning.

  5. Chris Jones says:

    Murray, I have been running this system for 18 months. The only issue I have had is the size and shape of my sump. I used 55 gal plastic drums and the water flow is high desturbing the settling solids. My solution was a stainless steal 100 micron screen. I also covered the pump with a 12 ” net pot and covered the net pot with hydrotone (clay balls). 6 months of trouble free running and counting…

  6. Murray says:

    Hi Chris, That is great. Yes CHOP 2 works really well. You are so right, the sump does need to be big enough. I use rectangular sumps in almost all of my projects and the very fine solid material tends to gather in the corners for fairly easy removal.

  7. Garry says:

    Hi Murray,
    This is my first post although I have followed your work with interest for several years now.

    I have been successfully running a system very similar to CHOP2 since 2007 (original design by Martin O’Dee) at my school here in Coffs Harbour. One issue not mentioned so far that needs to be considered is that pumping output must be shared between the fish tanks and grow beds. Therefore the pump output needs to be considered carefully. If output is insufficient, problems with water exchange in the fish tanks could lead to critical parameter issues such as oxygen or even ammonia spikes following feeding (depending on stocking density). Basically, a CHOP2-type system may need a higher output pump, with associated running costs.

    I am currently trialling a 12 volt, uninterruptable supply system for use in a food security project our school is developing in Bali. Because of the limitations on pump output (primarily because of current demand), I am using the single-direction flow (sump-to-tank; and gravity from tank-to-grow bed-to sump) in order to maintain adequate water exchange in the fish tanks.

    One other thing to consider is the capacity of the sump in the event that one section is shut down for harvesting or maintenance etc. The sump needs to be of a sufficiently large capacity to provide for a change in water level in the event of changing input and/or output flows. In my system the sump is not quite big enough and I can run it dry if reducing input flow without carefully adjusting outputs.

    Just some thoughts for consideration…

  8. Murray says:

    Hi Garry,
    Excellent post, thanks for your input.
    I tend to oversize my pumps a little anyway. It is always in tension, the balance between running costs and having a good water flow. We have gone through several pump down-sizings and the having gone a bit too far’, up-size again. We are still to identify the perfect pump. ( the perfect pump would be no pump) I feel that a timer system is best where power supply/continuity is at a minimum. We have identified some really good quality timers and we are building a trial system soon to go down that path yet again to see if we can tweek some power consumption improvements in that area. Our backup system has just been rebuilt and we have gone over to 24 vdc. It is much more stable than 12 vdc especially if sending the DC current any distance. Once again the pump is the weakness. Finding a 24 v economical DC pump that is rated for continuous operation and does not draw down too many amps is a challenge.
    Your comments re the sump. We find it must be capable of holding all the water from the beds if they all dump at the same time….and then some.

  9. Garry says:

    Hi Murray,
    Yes, dc pumps are a huge challenge. I have stuck with 12V primarily because of the classic trade-off necessity. Each gain comes at a cost. I am trialling a marine bilge pump that is supposed to be suitable for continuous use. Keeping current draw to an acceptable level has necessitated a slightly smaller output volume. It limits the system to fairly level ground (minimal head) and short distances, but so far seems to be working very well.

  10. Matijn Goossens says:

    Hellu Murray,

    I just recently joined your blog. I live in Belgium NorthWest Europe . On the momen temperature at night can be -15 decrees celsius. I have some questions, probably some are real stupid beginners questions.
    Do you know of anyone here in Belgium or the Netherlands who are doing Aquaponics?
    Anyway, i’m planning to buils a CHOPmark2 system with 3 IBC in a small greenhouse in the garden of our community.
    1 question on this CHOP2 system: 1000 liter fishtank 3x approx. 400l growbeds and
    say only a 500 liters max in the sump.I’m fuzzeling about the amounth of water in the system. When the sump is empty my growbeds are not filled with water yet, or am i wrong? I could fill them on turn but then i need a special valve. I don’t want that! I could fill them in different levels so they drain one after another. As you can see i don’t see it clear. If al my growbeds are draining at the same time my sump could overflow. Can you give some more insights on this. How big does the sump needs to be?
    Ofcourse if i use plain pebbles riverstones i need les water then when i use the expanded clay beads (her it is called Argex).

  11. Murray says:

    Hi Matign,
    If you are using auto siphons, it is rare that they will all dump at the same time. The grow bed capacity is about one third of water when it is fill, so that is two thirds gravel and one third water. The sump needs to be able to hold all the water if by chance all the grow beds dump at the same time, plus a bit more to make sure the pump is covered and working. I hope this is helpful to you.

  12. Jon says:

    What about using Pneumatic? All pumps and valves are air operated, you just have one motor on your compressor. All valve are 24vdc or 12vdc, if you have a power outage your backup is a gas powered compressor.

  13. arrow dryden says:

    hi Murray,
    Do you think it would be Ok to use a IBC tote that held water based primer paint for a chop mark2?

  14. Murray says:

    Give it a good wash out and it should be fine.

  15. S Barks says:

    What kind of bilge pump is it? I am trying to build a solar system currently, and any information would be helpful.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

To use efence you must get an API key